35
SYSTEM SETUP
DISPLAY – SPOT OUT
Click on the ‘
SPOT-OUT
’ menu and click the camera channel
for ON/OFF.
.
The DVR has 4 SPOT MONITOR OUTPUT (Digital Spot) and user can assign the SPOT OUT display for each channel
Spot monitor displays a full screen sequence of particular channels, depending on the settings within this menu.
For spot monitor, the operator can decide which channels are to be displayed in the sequence.
By default, Spot Monitor output is set to run a sequence of all 16 channels.
SPOT TITLE: Input the title of each spot monitor.
ACTIVATION: Toggle each spot monitor ON/OFF.
- Click ‘
MODIFY
’. (Below is default setup)
- To modify the current display, double-click the display. Then ‘Spot Sequence Setup” window will appear.
Setup method is similar to the Sequence setup performed earlier (can only use single or quad mode for spot output).
- To add an additional display, click ‘
ADD
’.
