32
SYSTEM SETUP
DISPLAY - MONITOR
Click the
MONITOR
menu, then click on any field.
Use the button to modify the value.
SEQUENCE DWELL
: The amount of time that each screen is displayed in a sequence.
SPOT-OUT DWELL
: The amount of time that each screen is displayed on each of the spot monitor outputs.
DE-INTERLACE MODE
: When recording any channels in D1 resolution (704 x 480), this may be set to ON,
to prevent interlaced motion distortion during playback.
ALARM POP-UP MODE
: When enabled, an alarm input will cause the associated channel to display full screen.
ALARM POP-UP DWELL
: Determines the amount of time a full screen popup is displayed after an alarm input.
If the alarm condition continues, the pop-up screen will be displayed constantly.
MOTION POP-UP MODE
: When enabled, motion detection will cause the associated channel to display full screen.
MOTION POP-UP DWELL
: Determines how long the full screen popup is displayed after motion detection.
If motion continues, the popup screen is displayed constantly.
To change any of these settings, highlight ‘
MONITOR
’ and press ‘
ENTER
’
to select.
Use the
CURSOR KEYS
to navigate to the option required.
Press
ENTER
to select the option (the cursor changes to orange) and use the
CURSOR KEYS
to change the setting.
Press
ENTER
to save the setting, or press
RETURN
to cancel.
