Ganz Digimaster Series DR16HRD Instruction Manual Download Page 60

Page: 60 / 85

SEARCH

During playback, user can put a bookmark on the recorded data that needs to be archived later.

Click the button at the time the archive is to be started. Then playback will halt and menu below will appear.

After inputting the “TAG” name, press

START

. Then the system will return to playback mode.

Click the button again at the end point of the archive. The menu below will appear once again.

RESERVE

: Press this button to reserve the currently selected data.

CONTINUE

: Press this button to go back and reserve more data. The system will return to playback mode.

START

: Press this button to start the reservation.

STOP

: Make sure to press this button to reserve the current data first. Then user can select RESERVE.

CLOSE

: Close the reservation menu and finish archiving.

NOTE

: Reserved data will be kept on the HDD.

The user can view all of the reserved clips listed in ‘

RESERVED DATA MANAGEMENT

’ within the

ARCHIVING

menu.

Summary of Contents for Digimaster Series DR16HRD






















































































Search results

Summary of Contents for Digimaster Series DR16HRD

Reviews:

Related manuals for Digimaster Series DR16HRD

Brands by name

Popular brands

Ganz Digimaster Series DR16HRD, Instruction Manual

Search results

Summary of Contents for Digimaster Series DR16HRD

Reviews:

Related manuals for Digimaster Series DR16HRD

Brands by name

Popular brands