GT7 Terminal
Configuration
www.gantner.com
HB_GT7-2x00-3x00--EN_12
45
5.6.4
External Webserver
Figure 5.25
– GT7 terminal web interface - External Webserver
The GT7 terminal can function as a client or server. For the configuration as described here, the GT7 terminal is
operating as a server, i.e., the PC connects to the GT7 terminal. If the GT7 terminal is operating as a client, an
external web server can be used. In this case, communication is completed via this web server.
- Enable external Webserver:
Select this option if a web server is to be used for communication. After selection, the
following settings are visible.
- Server address:
IP address of the web server (IPv4 format).
- Enable secure communication:
When this option is selected, TLS is used for the web socket connection.
- Access token:
In this field, an additional value for authentication can be specified, which is entered in
the authorization field of the HTML header. What must be entered here depends on
the implementation by the third-party software.
- Reconnection timeout:
In this field, enter the waiting time in seconds until reconnection is attempted after the
connection between the GT7 terminal and the management software has been
interrupted.