GT7 Terminal
General Information
14
HB_GT7-2x00-3x00--EN_12
www.gantner.com
2.3
Functional Description
In order to activate a function on the GT7 terminal, e.g., to open a locked door, to view information, or to use a time-
controlled device, the user must first identify themselves. Identification can be performed in a variety of ways: using
data carriers with the RFID reader (Radio Frequency Identification) of the GT7 terminal, via NFC (Near Field
Communication), or with a barcode scanner (e.g., ATR 110/200 barcode scanner).
Following identification, further operation, such as the selection and confirmation of functions, is completed directly
on the device by touching the display. The ultra-clear touchscreen intuitively guides the user through the clearly
structured levels of the app. The wide range of executable apps
(see “2.1 Intended Use”) allow the flexible use of the
terminal. Depending on the application, the GT7 terminal can operate as a standalone device or forward authorization
decisions on via the network to a control software, e.g., Relaxx. The communication can occur via Ethernet or Wi-Fi.
The GT7 terminals are suitable for both indoor and protected outdoor use. Every installation requirement is covered
with the various terminal models and holders provided to surface mount, flush mount, pole mount, or table mount the
GT7 terminal.
The configuration of the terminal can be completed on the device itself with limited settings or the full range of
settings are available via a web browser (web interface) or via the GANTNER Cloud (G7 Connect). Through the
configuration, the functionality of the GT7 terminal can be customized to the respective requirements.
2.4
Device Overview
The number designation of the GT7 terminals indicates the type of terminal. The number contains the following
information.
GT7.abcd -> a
… Number of inputs/outputs:
"2" = Standard equipment, 1 relay output, 1 optocoupler input
"3" = Additional to "2": camera, 2 relay outputs instead of 1,
WLAN, microphone, Wiegand interface (can be used as a status
input), RS-232
b
… RFID reader technology:
"3" = LEGIC advant and Proxy reader
"5" = MIFARE (ISO 14443) and ISO 15693 reader
"7" = LEGIC advant Proxy and HID iCLASS reader
c
… Type:
"0" = Standard (no additional reader)
"2" = Additional barcode reader
"3" = Additional fingerprint reader
d
… Housing:
"0" = Standard surface-mounted housing
"1" = Flush-mounted variant
2.5
Terminology
Some terms are used frequently in this manual and these are defined below.
GT7 Terminal
This term refers to all variants of the GT7.2x00, GT7.3x00, and GT73x01 model ranges, regardless of which app is
currently active. Since the configuration of the GT7.3x01 (built-in variant) is identical to the GT7.2x00 and GT7.3x00,
this manual is also valid in large parts for this variant. However, the installation and order information for this variant
are available in a separate document (VB_GT7-3x01-EN+EN).