GL7p - Battery-powered, door-mounted electronic locker lock GL7p
Commissioning
34
HB_GL7p--EN_12
www.gantner.com
To configure the GL7p via PC/laptop:
► Start GAT Config Manager on the PC/laptop.
► Connect the USB cable (type-A end) to a spare USB port on the PC/laptop.
► Open the battery compartment (see section “4.2.2. Inserting the Battery”)
► Connect the Micro-B connector of the USB cable into the USB port on the GL7p.
o
When the GL7p is connected to the computer for the first time, the driver is automatically installed and
the lock recognized.
If the automatic driver installation does not work and you need the driver, it is availble on the "Leisure
Software" USB stick in the GAT ECO.Basic Set or via the partner area of the GANTNER website.
► After connecting to the computer, the LED flashes red/green alternately (if the GL7p has already been
configured once).