![background image](http://html1.mh-extra.com/html/gantner/gl7p/gl7p_installation-configuration-and-operation_3409513027.webp)
GL7p - Battery-powered, door-mounted electronic locker lock GL7p
Installation
www.gantner.com
HB_GL7p--EN_12
27
3.8.2
Instructions for Installing the GL7p
After drilling the mounting holes, complete the following steps to install the GL7p according to the installation
diagram.
3. GL7p
8. Lock nut
4. Locker door
9. Anti-rotation dome
5. Mounting thread
6. Fixing nut
7. Latch
10. Spacer sleeve (only for thin doors under 10 mm, e.g., single-wall metal door)
11. Washer (only if spacer is not used)
12. Screw for anti-rotation
1)
1)
For doors with a thickness of 1 to 5 mm and 13 to 18 mm, a corresponding KA35 screw is included with the delivery. For other
door thicknesses, use appropriate KA35 or 3.5 mm self-tapping screws.
Figure 3.8
– Installation of the GL7p
► Mount the GL7p onto the locker door by inserting the mounting thread (5) and anti-rotation dome (9) into the
holes in the locker door.
► Screw the fixing nut (6) onto the mounting thread and tighten the nut so that the lock is held firmly on the door
(torque max. 5 Nm).
► Insert the latch (7) in the correct orientation onto the fixing screw.