GANSHORN Medizin Electronic GmbH
Service Manual Ref.No. 03 140 0 046
PowerCube-Ergo-CASE_ENG_rev.02, 23.11.2012
Preface, page 5 of 8
Documentation
Ref.No.
03 140 0 046
Valid for.:
PowerCube-Ergo-SSO, Ref.No. 03 337 0 210 and 03 337 0 238,
Rev. D and higher
Related documents:
Operating Instruction manual LF8
Operating Instruction manual PowerCube-Ergo
Copyright
2012, GANSHORN Medizin Electronic GmbH
Revision history
The release number changes with every update for this documentation
General Notes
All GANSHORN documents correspond to the state of the underlying safety standards at the time of
printing.
All illustrations in this documentation are provided as examples only. They may not necessarily reflect
your equipment setup or data displayed. All pictured GANSHORN products and screen displays can
deviate, due to technical changes.
All rights, including reprints, copying, and those from translation remain reserved by the publisher.
No part of this documentation may be reproduced in any form whatsoever or copied using electronic
reproduction systems without the publisher’s express written permission.
Update
This documentation is also regularly reviewed. Changes, technical improvements, as well as any
typographical errors are taken into consideration in each following issue.
Technical changes/modifications made on the devices after the issue date are not contained in this
documentation.
Changes/modifications performed on GANSHORN products that affect the hardware and software must
be documented in a Medical Device Book.
The operator must be accordingly trained concerning the changes/modifications. This must subsequently
be documented in the Medical Device Book.
In the case of non-observance, the manufacturer is not liable.
Release date:
Release number:
Comment:
11 February 2009
Release 01/2009
Index a
Initial release
09 March 2009
Release 01/2009
Index b
Preface, modification of front cover
07 October 2009
Rev.01
Change of the release number
Change of the ref. number system
Revision of the English translation
Modifications to REV.D (board layouts chapter 4)
Modifications to Installation Assistant (chapter 5)
Update Appendix B and D
23 November 2012
Rev 02
Update of the rear and front panels of the
PowerCube according to IEC 60601-1 3
rd
Edition
and review of contents