Initial configuration of the network settings
G&D MultiPower-6-NT ·
11
English
2. Enter the following data in the login mask:
3. Click on
Login
.
Configuring the network interface
How to configure the settings of the network interface:
1. In the menu, click on
MultiPower-NT
.
2. Click on the device you want to configure and then click on
Configuration
.
3. Click on the tab
Network
.
4. Select the section
Interfaces
.
5. Enter the following values:
Username:
Enter the username of an administrator account.
Password:
Enter the password of the administrator account.
IMPORTANT:
Change the administrator account's default password.
The
default
access data is:
Username:
Admin
Password:
see
login
information on the label on the bottom of the device
NOTE:
The default
admin
password for devices manufactured before
March 2020 is
4658
.
NOTE:
The
Link Local
address space 169.254.0.0.0/16 is reserved for internal com-
munication between devices according to RFC 3330. It is not possible to assign an
IP address of this address space!
Operating mode
Select the operating mode of
Interface A
:
Off:
Switch off network interface.
Static:
A static IP address is assigned.
DHCP:
Obtain IP address from a DHCP server.
IP address:
Only if the Static operating mode is selected, enter the IP
address of the interface.
Netmask
Only if the Static operating mode is selected, enter the net-
mask of the network.
