Package contents
G&D miniMUX4 ·
5
Package contents
1 × »miniMUX4« KVM switch
1 × power cable
1 × update cable
1 × manual
Installation
The following pages provide a description of how to connect console devices (key-
board, mouse and monitor) and computers to the KVM switch.
Mounting the device
1. Turn off the computers you want to connect to the KVM switch. Now, unplug
any keyboard and mouse cables from the interfaces.
2. Place the KVM switch between the computers and the console. Please mind the
maximum cable length between the KVM switch and the computers you want to
connect to the KVM switch:
Up to 6 meters when using the
PS/2 variant
of the connection cables
Up to 6 meters when using the
USB variant
of the connection cables
IMPORTANT:
The KVM switches are available in sets including 2 m PS/2 or USB
connection cables.
You need to order the KVM switch and cables separately if you want cables of a dif-
ferent length or if you want to connect computers with both PS/2 or USB signals to
a KVM switch.
The order numbers of the KVM switches and cables are listed on page
50
.
NOTE:
The numbers on the interfaces on the device‘s back panel comply with the
number of the computers shown in the On-Screen Display of the KVM switch.
