Configuration
G&D miniMUX4 ·
37
Configuring the system
Only the
Supervisor
or (apart from resetting the default configuration) users with con-
figuration rights can view and edit the system settings of the KVM switch.
The following settings are enabled in the default configuration:
Changing hotkeys or double hotkeys
Hotkeys or double hotkeys let you:
Call the on-screen displays:
In the default settings of the KVM switch you can use
Num
(Sdefault:
Ctrl+Num
) to call the on-screen display.
Access a computer:
You can access a computer by pressing the hotkey and a select
key at the same time (see page 11).
The single hotkey
Ctrl
is preset in the default settings. If an application program or
another G&D device uses the same hotkey, you can change the hotkey in the set-
tings of the KVM switch You can also enable the usage of double hotkeys (see
How to change current hotkeys or double hotkeys:
1. Press
Ctrl+Num
(standard) to open the On-Screen Display.
2. Press
F1
to open the
Function
menu.
3. Use the
Arrow keys
to select
System Config
and press
Enter
.
4. Use the
Arrow keys
to select
Hotkey
and press
Space
to select one of the following
options.
The following keys are available as
single hotkeys
:
SYSTEM CONFIG
miniMUX4
Hotkey:
Ctrl
Double Hotkey:
No
OSD via 2x Keypress:
No
Select Keys:
0..9
Cascade Setup
...
USB Keyboard Mode
...
PS/2 Keyboard Type
...
Set System Defaults
...
Esc
Enter
F1:Save
NOTE:
You can also adjust the settings in the KVM switch to open the OSD by
pressing
Ctrl
or
twice (see page 39).
Ctrl:
Enables
Ctrl
hotkey
Alt:
Enables
Alt
hotkey
Alt Gr:
Enables
Alt Gr
hotkey
