Configuration
G&D miniMUX4 ·
35
How to select the scancode set for PS/2 keyboards:
1. Press
Ctrl+Num
(standard) to open the On-Screen Display.
2. Press
F1
to open the
Function
menu.
3. Use the
Arrow keys
to select
Console Setup
and press
Enter
.
4. Use the
Arrow keys
to select
Scancode Set
and press
Space
to select scancode set
2
or
3
.
5. Press
F1
to save your settings.
6. Restart the KVM switch. The setting applies after the restart.
Calling the On-Screen Display by mouse
In the default configuration, you can only the On-Screen Display can only be called
up with the preset key combination.
If a Microsoft »IntelliMouse Explorer« or another compatible mouse is connected to
the KVM switch, you can use the mouse keys
4
and
5
to access the On-Screen Display.
How to disable/enable the mouse support to operate the On-Screen Display:
1. Press
Ctrl+Num
(standard) to open the On-Screen Display.
2. Press
F1
to open the
Function
menu.
3. Use the
Arrow keys
to select
Console Setup
and press
Enter
.
4. Use the
Arrow keys
to select
OSD by mouse
and press
Space
to select one of the fol-
lowing options:
5. Press
F1
to save your settings.
NOTE:
If you access the On-Screen Display by mouse, you cannot use Microsoft‘s
»IntelliMouse Explorer« or another compatible mouse when performing the Step-
scan function (see page 36).
No:
OSD cannot be opened by mouse
Yes:
OSD can be opened with keys
4
and
5
of a compatible mouse
