The »miniMUX4« KVM switch
4
· G&D miniMUX4
The »miniMUX4« KVM switch
With the
miniMUX4
KVM switch, you can operate up to four computers over one
console.
Accessing a computer connected to the KVM switch establishes a connection to that
computer. The computer is operated through keyboard and mouse that are connected
to the KVM switch. The video signal is displayed at the monitor connected to the
KVM switch.
You can switch between computers either by using key combinations or the On-
Screen Display (OSD).
Support of PS/2 and USB input devices
You can operate the KVM switch and the connected computers with PS/2
or
USB
keyboards and mouses.
Depending on the mouse and keyboard interfaces of the computer you want to con-
nected, either use USB or PS/2 cables to connect the computers to the KVM switch.
NOTE:
Apply a
Multichannel
variant if you want to operate computers to which sev-
eral monitors are connected.
Multichannel variants provide interfaces to connect
two
(MC2),
three
(MC3), or
four
(MC4) monitors. They also provide the same amount of video inputs per computer.
NOTE:
Regardless of the type of console keyboard and mouse (PS/2 or USB), the
signals of both input devices can be transmitted either via PS/2 or USB interfaces.
NOTE:
Use the following cables to be able to perform advanced functions of spe-
cial keyboards:
PixelPower or SKIDATA keyboard:
»CPU-PS/2« connection cable
USB Multimedia, Apple or Sun keyboard:
»CPU-USB« connection cable
