G&D DP1.2-Vision-Fiber, Installation And Operation Manual

Page: 95 / 152

Installation
G&D DP1.2-Vision-Fiber · 16
English
USB 2.0 Trans.|Tx: When using an ARU2 variant, insert the LC plug of the fibre optic
cable connected to the USB 2.0 Trans.|Rx interface of the computer module.
USB 2.0 Trans.|Rx: When using an ARU2 variant, insert the LC plug of the fibre optic
cable connected to the USB 2.0 Trans.|Tx interface of the computer module.
Connecting an additional interface of the CON-2 variants
Transmission|Tx:
Insert the LC plug of the fibre optic cable connected to the
Transmis-
sion|Rx
interface of a compatible computer module or matrix switch.
IMPORTANT:
Transmitting data of USB devices connected to the user module
between the user module and the computer module (and vice versa) requires trans-
mission modules that use laser technology and comply with laser class 1.
Please note the following safety instructions regarding this matter:
 Only use G&D certified transmission modules on page 3
NOTE:
Connect the USB 2.0 Trans. interfaces to one of the dynamic ports of the IO
card CCD-IO16-Card-MULTI if you want to connect the computer module to a
compatible matrix switch (see page 5).
Mind the notes in the paragraph
Purpose and configuration of multi cards in the user
manual of the web application.
NOTE:
With the also available CON-2 versions of the user modules, you can con-
nect a console to two different digital extenders of the Vision series.
Alternatively, you can connect a compatible matrix switch to each of the two
channels instead of a digital extender.
IMPORTANT: The device uses components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE: Remove the protection caps from the Transmission interfaces and the cable
plugs.
RS232 USB Devices
DP Out Micro In Speaker
Transmission 2
Main P
ower
Transmission 1 Red. Power
Mouse
Keyb.
Generic
Keyb./Mouse