G&D DP1.2-Vision-Fiber, Installation And Operation Manual

Page: 82 / 152

Safety instructions
3 · G&D DP1.2-Vision-Fiber
Special advices for dealing with laser technology
The devices of the DP1.2-Vision-Fiber series use components with laser technology
which comply with laser class 1 or better.
They meet the requirements according to EN 60825-1:2014 as well as U.S. CFR 1040.10
and 1040.11 .
Mind the following advices when dealing with laser beams:
!
Avoid direct eye exposure to beam
Never stare directly into the beam when wearing optical instruments!
!
Always connect optical connections or cover them with protection caps
Always cover the optical connections of the Transmission socket and the cable
plugs with a connector or a protection cap.
!
Only use G&D certified transmission modules
It is not permitted to use fibre optic modules, which do not meet the requirements
of laser class 1 in accordance to EN 60825-1:2014 . By using such modules, the
compliance with regulations and advices for the safe handling of laser technol-
ogy cannot be guaranteed.
The guarantee of complying with all relevant instructions can only be given by
applying original components. Therefore, the devices have to be operated with
G&D certified transmission modules only.
Class 1 Laser Product
EN 60825-1:2014
Complies with 21 CFR
1040.10 and 1040.11
Invisible laser beam, avoid
direct eye exposure with
optical instruments
Produit laser de classe 1
EN 60825-1:2014
Est conforme à 21 CFR
1040.10 et 1040.11
Laser invisible, évitez
l'exposition directe des yeux
avec des instruments optiques
LASER KLASSE 1
EN 60825-1:2014
Complies with 21 CFR
1040.10 and 1040.11
Unsichtbare Laserstrahlung,
nicht direkt mit optischen
Instrumenten betrachten