Installation
G&D DP1.2-Vision-CAT ·
12
English
Connecting audio and RS232 interfaces
Line In:
If required, connect a microphone to this interface.
Speaker:
Connect the speakers or another audio output device.
RS232:
Connect the serial end device to this interface.
Connecting further interfaces of ARU/ARU2 variants
USB 2.0 Devices:
Use the two interface on the back and the two interfaces on the front
to connect USB devices.
USB 2.0 Trans.
Plug a category 5e (or better) twisted pair cable, which is available as
accessory, into this interface of the
ARU2
variant. Connect the other end of the cable
to the
USB 2.0 Trans.
interface of the computer module.
NOTE:
The
USB 2.0 Devices
interfaces of
ARU
and
ARU2
variants support different
data rates:
ARU
variants:
full speed
ARU2
variants:
high speed
NOTE:
Connect the
USB 2.0 Trans.
interface to one of the dynamic ports of the IO
card
CCD-IO16-Card-MULTI
if you want to connect the computer module to a
compatible matrix switch (see page 3).
Mind the notes in the paragraph
Purpose and configuration of multi cards
in the user
manual of the web application.
Transmission
USB 2.0 Trans.
RS232
Line In Speaker
Main P
ower
Keyb./Mouse Red. Power
DP Out
Generic
Keyb./Mouse
USB 2.0 Devices
Transmission
USB 2.0 Trans.
USB 2.0 Devices
Main P
ower
Keyb./Mouse
RS232
Red. Power
DP Out
Line In Speaker
Generic
Keyb./Mouse
