The DP1.2-Vision-CAT series
3
· G&D DP1.2-Vision-CAT
The DP1.2-Vision-CAT series
KVM extenders of the
DP1.2-Vision-CAT
series consist of a computer module and a
user modules.
Connect the computer to be operated as well as an optional console to the computer
module (
DP1.2-Vision-CAT-CPU
). The remote console is connected to the user module
(
DP1.2-Vision-CAT-CON
).
Both the computer module and the user module are connected via a category 5e (or
better) twisted pair cable. Signals of keyboard, mouse and DisplayPort™ video of
the computer connected are transmitted using these cables and enable you to oper-
ate the computer remotely.
The computer can either be operated at the remote console of the user module or at
the local console of the computer module.
Available variants
The
DP1.2-Vision-CAT
series provides further variants that additionally enable the
transmission of USB 2.0 signals:
Optional connection to a KVM matrix switch
As an alternative to using the devices as stand-alone units, you can also connect the
computer modules (
CPU
) and the user modules (
CON
) of the
DP1.2-Vision-CAT
series to
compatible G&D KVM matrix switches.
Use the
CPU
modules to connect computers and the
CON
modules to connect work-
stations to the matrix switch.
The above-mentioned variants are compatible with the following matrix switches:
DVI-Center-Serie:
Version 2.0.001 or later
ControlCenter-Compact-Serie:
Version 1.0.001 or later
ControlCenter-Digital-Serie:
Version 2.0.001 or later
Variant
Video channels
USB 2.0
DP1.2-Vision-CAT-AR
1
not supported
DP1.2-Vision-CAT-ARU
1
full speed
DP1.2-Vision-CAT-ARU2
1
high speed