Configuration
40
· G&D DP-Vision-CAT
Changing the video mode of consoles
In the standard configuration of the KVM extender, the computer’s image is output at
the monitor of the active console as well as at the monitor of the concurrent console.
You can also specify that the image of the other console is
temporarily
or
permanently
switched off as soon as an entry is made at a console.
How to select the video mode of a console:
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
Console setup
and press
Enter
if you want to adjust the video
mode for the remote console (at the
CON
module).
Select the row
Local console setup
and press
Enter
if you want to adjust the
video mode for the local console (at the
CPU
module).
3. Under
Video mode
press
F8
to select one of the following options:
always on
The computer screen is displayed on both the
monitor of the active and the monitor of the
concurrent console (
default
).
switch off
The screen of
this
console (depending on the selection
made in step 2) is
temporarily
switched off whenever an
entry is made on the concurrent console.
After the time period of the input lock (see below) has
elapsed, the screen is
automatically
switched on again.
keep off
The screen of
this
console (depending on the selection
made in step 2) is
s
witched off
permanently
if an entry is
made on the concurrent console.
After the time period of the input lock (see below) has
elapsed, you need to make an entry on this console to
switch on the screen again.
4. Press
F2
to save your settings.
Summary of Contents for DP-Vision-CAT Series
