Gamry Instruments TDC4, Operator'S Manual, Page: 10 / 32

2 - 1
Chapter 2 -- Installation
This chapter covers normal installation of the TDC4 Temperature Controller. The TDC4 was designed to
run the experiments in the Gamry Instruments CPT110 Critical Pitting Test System, but it is also useful for
other purposes.
The TDC4 is a slightly modified Omega Engineering Inc., Model CSi8D Temperature Controller. Please
review the Omega User's Guide to familiarize yourself with the operation of the temperature controller.
Initial Visual Inspection
After you remove your TDC4 from its shipping carton, you should check it for any signs of shipping
damage. If any damage is noted, please notify Gamry Instruments, Inc. and the shipping carrier
immediately. Save the shipping container for possible inspection by the carrier.
Warning
The protective grounding can be rendered ineffective if the TDC4 is
damaged in shipment. Do not operate damaged apparatus until its safety
has been verified by a qualified service technician. Tag a damaged TDC4 to
indicate that it could be a safety hazard.
Unpacking Your TDC4
The following list of items should have been supplied with your TDC4:
Qty
Gamry P/N Omega P/N Description
1 990-240 Gamry TDC4 (modified Omega CSi8D)
1 900-059 Gamry TDC4 Operator’s Manual (this document)
1 Main Power Cord – USA version
2 Output Power Cord
1 MQS-3355 Omega Quick Start Guide
1 M-3355 Omega iSeries Users Guide
1 M-3906 Omega Users Manual
1 M-3397 Omega Communications Manual
1 985-00093 RS232 Cable, 9D-9D, Straight Through
1 990-055 RTD Probe
5 630-017 Spare Input Fuses, 5x20mm 240V 10A Slow
5 630-018 Spare Output Fuses, 5x20mm 240V 5A Fast
Contact your local Gamry Instruments representative if you cannot locate any of these items.