MPCe/LPCe Users Manual
18
HVE Control
This setting enables and disables the high voltage enable (HVE) options. See the High Voltage/TSP Interlock
section for additional details on this option.
Addr
The controller supports RS 232/422/485 serial standarads. These protocols require the controller to have a
unique address. For controllers set in the same 485 string, this address must be unique for each controller in the
string. The default value set is five (5). The address can be between 0 and 255. The << button is equal to a
backspace.
Reset
Selecting this option resets all MPCe/LPCe system parameters to their default values. A confirmation is required.
Update
This option initiates an on screen message to confirm that a new firmware version is to be loaded. For further
information, contact Gamma Vacuum and reference Service Bulletin 00.004.343.
Set Clock
Settable parameters include hours, minutes, day, date, month, and year. Hours are in 24 hour format. AM and
PM are not selectable. When parameters are entered, press the OK button.
