Assembly Instructions
Step 5:
13
Locking Knob is included on Model
161732 Oversized EZ Set Hang On
Treestand Sold Separately
Attach hook on cam buckle strap to the
triangle area of back platform. Wrap
tree strap around tree and attach hook
on other end of tree strap to platform
with hook facing away from tree as
shown in Figure 4. Do not tighten.
For cam buckle threading instructions
refer to Figure 5.
WARNING! CAM BUCKLE STRAP
MUST BE INSTALLED. FAILURE TO
FOLLOW THESE INSTRUCTIONS
CAN RESULT IN SERIOUS INJURY
OR DEATH.
Cam Buckle Strap is included with
Model 161732 Oversized EZ Set
Hang On Treestand Sold Separately)
Figure 5
Figure 4
Step 4:
With Locking Knob removed from
Hang-on Stand hole, install Hang-on
Stand onto the Hang-on Bracket which
was pre-installed on tree in step 2.
Make sure Hang-on Stand fully
engages Bracket so holes on Stand
and Bracket line up. Secure Hang-on
Stand by inserting Locking Knob
through Hang-on hole and tightening
the Locking Knob onto bracket as
shown in Figure 3.
Figure 3
Install Hang-on to
the Hang-on Stand
Bracket and then
Tighten the Knob
WARNING! LOCKING KNOB MUST
BE ATTACHED AND TIGHTENED TO
BOTH HANG-ON STAND AND
BRACKET. FAILURE TO FOLLOW
THESE INSTRUCTIONS CAN RESULT
IN SERIOUS INJURY OR DEATH.
