Installation Instructions
WARNING!
Step 1:
Double check to assure you are wearing
and properly attached to tree with full
body harness with lineman’s climbing
strap. If you are not, STOP
and do not leave the ground.
Remaining attached to tree with
lineman's climbing strap, climb up
Climbing Sticks (not included) to desired
stand location. Only use Climbing Sticks
that are tested by a third party testing
laboratory to meet or exceed industry
standards and follow Climbing Stick
manufacturers' instructions and warnings
for proper installation and use.
Read and understand included Full Body
Harness Instructions, Warnings and watch safety
video for instructions on using your Full Body
Harness with lineman’s climbing strap.
Always remain connected to tree with lineman’s
climbing strap and tree strap from moment you
leave ground until you return to ground.
Step 3:
With hang-on platform folded up (Figure
2), use pull up rope to lift hang on up
tree.
Model 161732 Oversized EZ Set Hang
On Treestand Sold Separately
12
ONLY FOR USE WITH APPROVED GAME WINNER TREESTAND MODEL 161732
OVERSIZED EZ SET HANG ON TREESTAND. Treestands sold separately.
Follow all warnings and expiration dates listed on tree strap warning label.
Always inspect strap for wear, cuts, or damage before use. Never use a
damaged strap.
Practice attaching/detaching, adjusting and using at ground level prior to using
at elevated positions.
Failure to follow these instructions can result in serious injury or death.
Figure 1
Install Hang-on Stand Bracket to Tree
Step 2:
Install Hang-on Bracket (#1) onto the tree
with ratchet strap and post facing up as
shown in Figure 1. Attach hook on
bracket so hook faces away from tree.
Assemble so Hang-on Bracket is level and
post is vertical.
For ratchet strap threading instructions
refer to Figure 1.
WARNING! HANG-ON BRACKET WITH
RATCHET STRAP MUST BE
INSTALLED. FAILURE TO FOLLOW
THESE INSTRUCTIONS CAN RESULT
IN SERIOUS INJURY OR DEATH.
ALWAYS ATTACH HOOK ON
BRACKET SO HOOK FACES AWAY
FROM TREE!
Figure 2
Pull Up Rope
