Installation Instructions
14
Step 6:
Rotate hang-on platform down so
platform’s cam action tightens
treestand to tree and prevents shifting.
Repeat until a tight contact between
treestand and tree is achieved.
Tighten the cam buckle strap making
sure the treestand is in contact with
the tree trunk and the treestand
assembly is very tight to the tree.
See figure 6.
WARNING! ALWAYS MAKE SURE
PLATFORM IS LEVEL! IF
PLATFORM IS LEANING FORWARD,
REPOSITION TREESTAND OR
SELECT DIFFERENT TREE.
Step 7:
Double Check. Correct tightening and
adjustments of hang on bracket ratchet
strap, locking knob and cam buckle
strap are critical to stable hang-on
treestand installation.
Always check to ensure treestand is
secure and properly attached to tree.
Six contact points (4 treestand points
and 2 tree strap points) must be in tight
contact with tree and locking knob must
be installed. If not, repeat step 2
through step 7 until tight with tree. See
figure 7.
Do not step onto platform until all contact points are tight to tree, hang-on bracket ratchet strap and
cam buckle strap are secured to treestand and tree and locking knob is assembled on treestand and
Hang-on Bracket. Failure to follow these instructions can result in serious injury or death.
WARNING!
Figure 6
Figure 7
Platform
Hang On
Bracket
Ratchet
Strap
Platform Brace
Tight Against Tree
Cam Buckle
Strap
Hang On
Bracket
Ratchet
Strap
Hang On
Bracket Tight
Against Tree
A
B
Locking Knob
Platform Contact
Points (2)
Hang On Bracket
Ratchet Strap and
Cam Buckle
Contact Points (2)
Hang-on Bracket
(2 Contact Points)
Platform
Tree Strap
Locking Knob
