Game ready ATX 590923, Use Manual

Page: 3 / 114

3 of 6
FULL LEG BOOT WRAP APPLICATION
1
Place the Full Leg Boot flat on the floor or on a
therapy table.
The Full Leg Boot ships with the boot section
already formed.
2
Place the affected
foot into the lower
section of the boot with
the heel in the
designated area.
Application of the Full Leg Boot should always be performed with the assis-
tance of a second person. To prevent injury, never attempt to apply the Wrap
to yourself.
Apply the Wrap with a uniformly close fit, ensuring there are no kinks which
may impede water flow. Ensure the connector hose is placed to prevent the
Wrap from folding or kinking at the hose inlet location of the Wrap.
4
Fold the wrap around the ankle and secure on the
opposite side of the leg.
3
Fold the wrap across the top of the foot and
secure on the opposite side of the foot.
NOTE
: Never cover the toes when
applying the Full Leg Boot.
5
Fold the loop side across the top of the leg,
ensuring there are no wrinkles in the fabric and
that it’s tight against the leg.
6
Fold the hook side across the top of the leg in
the other direction, ensuring there are no
wrinkles in the fabric and that the wrap is tight against
the leg.
7
Attach the Wrap to the Control Unit with the Connector Hose. There should be an audible “click”. To
disconnect, simply press the blue or gray button and remove the connector from the Wrap.
8
To remove the Wrap, unhook the leg portion first, then unhook the foot portion. Set the Wrap away
from the body.
NOTE
: Always have the Wrap applied while either sitting or lying
down with your legs straight.
The Full Leg Boot may be applied to either the left or right leg.