G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
MegaV2 250 Installation Guide, Release 2.2
19
Figure 15: Initial config. wizard: number of battery cabinets
5
.
Indicate the total capacity of all connected battery cabinets, in ampere/hours (Ah), then
press "Next". (This capacity figure is used by the UPS when in battery mode to calculate
the amount of backup time remaining.)
If you are not sure of your battery cabinet's Ah capacity, look at one of the batteries in the
cabinet. The Ah rating is usually indicated on the battery's exterior. The Ah rating of a
single battery is the same as for the entire cabinet. Enter this number in the wizard screen.
Figure 16: Initial config. wizard: set battery capacity
