40
EN
Do not place any objects on the glass flap or on the control panel (Touch Control “TC”) (Fig.4.4.a.4).
IV.4.b EXTRACTION OPERATION
Turning on the extraction system:
-> Open the central glass flap.
-> Touch the ON/OFF key for a few seconds and the symbol will light up.
-> Touch the Selection area (12) to activate the extraction system.
Attention: the extraction area is equipped with a mechanical rotating central flap.
The flap must be opened before activating the extraction system.
If the central flap is inadvertently closed completely with the extraction activated, a sensor
automatically stops the motor. Extraction only restarts when the flap is reopened.
Extraction speed (power):
The extractor is equipped with 9 levels of extraction speed (power).
Touch and slide your fingers along the Selection Bar (4) to increase or decrease:
→
to the right to increase the power level;
←
to the left to decrease the power level.
The power level set will be displayed in the Selection/Display area (12)
Booster function "P" (Enhanced Extraction)
The extractor is equipped with an additional power level (Booster, in addition to level 9).
The extractor will go to the supplementary speed (Booster) for 8 minutes and then it will
automatically switch to level 9.
To activate the Booster function, scroll with your fingers along the selection bar (4) beyond level 9
up to "P".
Booster level 1 is indicated in the Selection/Display area (12) with symbol flashing
Fig. 4.4.a.4
