31
EN
U3
Volume for signal
tones
0,1,2,3
Adjusting the volume of the acoustic signals
(e.g. when the timer expires):
0: No button tone
1: minimum volume
2: half volume
3: maximum volume
U4 Display
brightness 0,1,2,3,4,5,6,7,8,9 Display brightness adjustment:
0: maximum brightness
....
9: minimum brightness
U5
Timer animation
0,1
0: No timer animation
1: The timer is animated 10 minutes before
it expires
U6 Permanent
pot
detection
Cannot be deactivated
U7 Behaviour
when
the
Timer expires
0,1,2
0: Acoustic signal for 120 sec.
1: Acoustic signal for 10 sec.
2: No tone
IV.3.d HOB OPERATION
Before selecting any function, it is necessary to activate the desired zone.
Switch-on/off
The extractor hob is turned on by touching the ON/OFF key (1) for a few seconds.
The symbol will light up
By keeping this key pressed, all the available functions will become visible for a few moments, then
only the main functions will remain active.
While using the hob, the other functions will also be activated and can be used.
All the available functions will be illuminated with low intensity, which will only increase when they
are activated.
To switch off, touch the ON/OFF key (1) for a few seconds.
Important: This function has priority over all the others, therefore it is possible to switch off the
hob at any time.
The hob switches off automatically after 20 seconds if all the cooking levels are set to 0 and no
operation is in progress.
Selection of cooking zones
Touch the Selection/Display area (2) corresponding to the desired cooking zone.
