29
/ 39
GB
28
– The appliance is intended for home use and for similar purposes (in shops, offices and
similar sites, in hotels, motels and other residential premises, or in facilities providing bed
and breakfast service). It is not intended for commercial use!
–
Do not plug the power cord in the electrical socket and do not unplug it with wet
hands or by pulling the power cord!
–
Never immerse the appliance into water or any other liquid (even its parts)!
– The producer does not undertake any responsibility for damage caused by improper use
of the appliance (e.g.
deterioration of food, injury, burning, scalding, fire, etc.
) and
its guarantee does not cover the appliance in the case of failure to comply with the safety
warning above.
USE OF THE APPLIANCE:
–
After completion of the vacuum process leave the cover of the
appliance open for the welding part to cool down.
–
CAUTION
–
The appliance is not designed for constant operation.
Do not use the welder constantly for longer than 15 minutes, then
leave it to cool down for approx. 10 minutes.
–
It is not intended for outdoors use.
–
The appliance must not be used in damp or wet environment and in any environment
with the danger of fire or explosion
(spaces where chemicals, fuels, oils, gases,
paints and other flammable or volatile materials are stored).
– Prevent penetration of liquid inside the air exhaustion section
A4
!
–
Do not seal fluids in liquid state.
If you want to store liquid food (such as soups), first
freeze the food in an appropriate container, cut the food into pieces, put in bags and seal/
vacuum them. Put the individual bags into freezer.
– Do not place the appliance on unstable, fragile or flammable surfaces (e.g.
glass, paper,
plastic, wooden varnished boards and various fabric/table cloths
).
– Use the appliance in the working position only at places with no risk of turning over
and in sufficient distance from heat sources (e.g.
heater, stove, cooker, oven, grill
),
flammable objects (e.g.
curtains, drapes, etc.
) and wet surfaces (e.g.
sinks, wash
basins, etc.
).
POWER CORD:
–
If the power cord of the appliance is corrupted, it has to be
replaced by the manufacturer, its service technician or a similarly
qualified person so as to prevent dangerous situations.
– Never put the power cord on hot surfaces and never let it hang over table edge or
worktop edge. If the cord is caught or pulled, e.g. by children, the appliance may overturn
and fall down, causing a serious injury!
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
– In order to ensure safety and proper function of the appliance, use only original spare
parts and accessories approved by the manufacturer.
– Only use this appliance for the purpose it was designed for, as specified in this manual.
Never use the appliance for any other purpose.
