31 / 39
GB
30
"Seal" button for sealing (B3)
Used only to seal bags (without vacuum-packing). Once activated, the indicator light
will come on, signalling the current process. As soon as the indicator light goes out, the
process has been completed.
"Vac Seal” button for vacuum-p sealing (B4)
Used for vacuum-packing, followed by sealing. Once activated, the indicator light will come
on, signalling the current process. As soon as the indicator light goes out, the process has
been completed.
"Stop" button to discontinue a p lock button (B5)
1. Lock
–
The lock is active every time the appliance is connected to the mains
– To deactivate the lock, press the button and hold it for approx. 1 second. The
indicator light will come on.
2. Discontinuing a process
– Any process in progress can be immediately discontinued
by pressing the button for a short time.
External button for vacuum-packing (A7)
Used for vacuum-packing of food in the vacuum-packing box
C
. By pressing the button,
suction will be started, it will last for a pre-defined time and then switch off automatically.
Suction can be switched off at any time by pressing the button
A7
again.
Caution
–
The lock only blocks the buttons
B3
and
B4
.
–
When any function is finished, the lock will be automatically activated.
Safeguard against overheating
If the inner parts of the appliance get overheated, the safeguard will be activated (sealing
cannot be used). Wait until the parts have cooled down and then you can resume the work.
USE
Note
When connected to the mains, the vacuum sealer will be in the standby mode. The light
indicators "Normal" and "Dry" (default settings) will come on.
Vacuum-packing and sealing of cling foil / bag:
Connect the appliance to the mains. Proceed according to instructions in Fig. 2:
1.
Press
A2
button and open the lid
A1
.
2.
Put foil/bag into the sealer with the open part ahead. If you wish to use vacuuming, it is
necessary to insert the open part of the cling foil / bag in the suction zone.
3.
Close the lid
A1
and push the lid edges down to lock it (a click will be heard).
4.
Select the required settings using the
B1
and
B2
buttons.
5.
Press the button with the required function (
B3
or
B4
). The function activity is indicated
by indicator lights
B3
and
B5
.
6.
As soon as the relevant button indicator light (
B3
or
B4
) goes out, the vacuum sealer
process has been finished. You may open the lid
A1
(first press
A2
button) and remove
the foil/bag.
7.