ENG
The Gallagher Liquid Monitoring App
Upon launching the app, you will be directed to the
"Inventory Page"
which serves as the
primary screen. From here, you can perform the following actions:
Configure and activate your device
Manage settings
Monitor resource levels
View a map displaying your resources' locations
Perform a message optimization update
Upload any pending activations
2.3 CREATE YOUR ASSET & ACTIVATE THE DEVICE
To activate the device, the app will step you through the process, which can be completed with or
without a Wi-Fi connection or mobile data using "Offline Mode".
You will need the asset measurements during this process to set the asset profile. The
measurements which are required are the Height "Maximum Depth" in Metres and "Total
Volume" in Litres of the asset being configured.
To proceed with the upcoming steps, you will need a mobile phone that is NFC compatible.
It is essential to ensure that NFC is enabled on the phone to successfully complete the
process.
Please refer to the NFC Troubleshooting section for instructions on how to enable NFC
on your phone.
