ENG
4.3 SETTING ALERTS
From the main inventory page, select the asset
for which you want to set alerts. This will open
the graph page for that asset:
At the bottom of the graph page, you
will see a bell icon. Click on this icon to
open the alert page.
On the alert page, you will see four
thresholds that can be set. The first
two thresholds are for increases in the
fill level, which are labelled "very high"
and "high." The next two thresholds
are for decreases in the fill level, which
are labelled "low" and "very low." Enter
the fill percentage for each threshold.
We recommend adding a buffer to the
percentage you select to account for
the time it takes for the next satellite
pass over.
To receive notifications, you can enter
your email address and/or mobile
number in the corresponding section.
In the "Send Email" section, enter the
email address where you would like
to receive notifications. You can add
multiple email addresses by separating
them with a comma.
In the "Send SMS" section, enter the
mobile number where you would like
to receive notifications. You can add
multiple mobile numbers by separating
them with a comma.
Once you have entered all the
necessary information, click on "Save"
to confirm your settings. You have
successfully set alerts for your asset.
If the fill level of your asset reaches
any of the thresholds you set, you
will receive an email and/or an SMS
notification.
1
2
3
4
5
