ENG
3.3 INSTALLATION ON TANK
It is recommended to add your asset and activate your device via NFC on site, next to the tank.
This is to enable accurate geolocation of your asset to the satellite. Wi-Fi is not required for
these steps, you can use
Offline Mode
(see
Offline Mode
section in this User Guide) and then
complete the process when you have Wi-Fi or mobile data.
Drill a hole for the sensor cable while
being careful to position it above the
overflow level. Ensure the hole is
smooth so it won't damage the cable.
Align the hole on the tank with the
sensor hole located on the mounting
base, then fasten it in place using
scews
Attach the sensor cable to the
device.
Make sure the white dots on both
the sensor cable connector and the
device connector line up, as shown.
Carefully lower the sensor cable into
the tank.
Secure the device into the
mounting base.
Push the device onto the mounting
base and it will lock securely with a
clicking sound.
