96833 v.2.0
35
Section 16
NaVIGaTION ENVIRONMENT
WaRNING! Banks GPS Navigation
is an optional feature available
to purchase from Gale Banks
Engineering. This option is not
standard on Banks iQ and will
be disabled in the Environment
Select menu. The software is sold
on a micro SD card and must be
inserted into the micro SD card
port on the Banks iQ to run the
Navigation program. Once the iQ
detects the Navigation program
the option will be made available
for use.
Please contact Banks Sales Department
at (888) 635-4565 to purchase a copy of
Banks GPS Navigation.
Banks GPS Navigation is a voice
guidance program that uses statistical
and probability analysis to help you
select and set destinations quickly
and easily. As you travel, the program
displays your location on the map. Voice
guidance tells you when and where to
turn. See
Figure 35
. The main screen
displays turn directions, compass
heading, distance to next maneuver, and
street names. If you leave your route, the
program calculates a new route to your
destination automatically.
Please refer to the Banks Navigation
manual for step-by-step instruction of
the navigation program.
-END, SEcTION 16-
Section 15
GPS DaTa ENVIRONMENT
GPS Data
The GPS Data Environment provides the
current status of the GPS in the Banks
iQ. In the Environment selection menu
press on the ‘GPS Data’ button. The Data
displays the accuracy of the system
depending on signal, the GPS Time, the
Speed the GPS is traveling, Latitude,
Longitude, and the GPS Elevation. See
Figure 34
. After reviewing the data,
press the ‘iQ’ icon to return to the
Navigation Environment selection menu.
-END, SEcTION 15-
Section 14
COMPaSS ENVIRONMENT
Compass
Press on the ‘compass’ button in
the ‘Environment Select’ menu. The
compass screen will display four (4)
changeable gauges and a compass. See
Figure 33
. Refer to
Selection 19
to
change the gauges displayed from a list
of available parameters.
The compass can be adjusted to have
the vehicle pointer in the center spin
around the compass settings or have
the compass spin around the vehicle
pointer to show the current heading. To
adjust the compass method of direction
pointing, press on the ‘Wrench’ icon to
go to the ‘Options’ menu. Press on the
‘Direction’ tab in the ‘Options’ menu. In
the Direction menu press ‘North up’ to
have the vehicle pointer rotate around
the compass or press ‘Direction up’
to have the compass rotate around
the vehicle pointer. After setting the
compass, press the iQ icon to return to
the ‘Environment Select’ menu screen.
-END, SEcTION 14-
