16
96833 v.2.0
Press the ‘Power’ button in the
ENVIRONMENT SELEcT screen to
access the Tuner and/or combo
Tuner/SpeedBrake.
Press the ‘Safety’ button on the
ENVIRONMENT SELEcT screen to
access the SpeedBrake and or combo
Tuner/SpeedBrake.
Power Environment, Safety
Environment and combo Power/Safety
Screens all display the following:
five user-selectable Gauges, Status
Indicator, and Brake or Power level.
See
Figure 11
.
Press the Wrench icon to see the
‘Adjustments’ menu.
Select any five gauges that you
want to show on your display. To
change a gauge, simply press on it
and you will be taken to the ‘Gauge
Placement’ screen featuring the gauge
you selected. Refer to
Section 19
for instruction on how to change
each gauge. The gauges can also
be changed to display in English or
metric units. Refer to
Section 18
for
instruction on how to change units.
The Status Indicator in the upper right-
hand corner of the screen displays the
communication status between the
Banks iQ and Banks Power Tuner and/
or SpeedBrake. In the event that an
on-screen alert or Banks Power Tuner/
SpeedBrake malfunction is triggered,
a status alert will appear in the upper
right-hand corner of the screen. See
Figure 48
. Press on the status alert
for more information about the alert
condition.
Below the Status indicator are the Up
and Down arrows. Press on the arrows
to increase or decrease Power level,
Brake strength, or target speed with
the corresponding change displayed in
between the arrows. Refer to
Section
6, 7, & 8
for instruction on use.
For ‘Braking’ or ‘Braking & Power’
environment, the active device or
mode will be highlighted in red in the
lower part of the screen. Refer to
Section 7 & 8
for instruction on use.
On the lower left hand corner of the
screen is the ‘Banks iQ Home’ icon,
which will direct you back to the
‘Environment Select’ menu, and the
Section 5
WORKING WITH POWER ENVIRONMENT, SaFETY ENVIRONMENT,
aND COMBO POWER/SaFETY SCREEN
Figure 11
Combo Tuner and Brake Screen Shown.
