1
Gal Pro
Instruction 1.0
When connected to the power supply for the first time the following screen appears:
The controller initializes (closes) the outputs. This process lasts several seconds, at the end of the
initialization the following message appears:
Initiate Output: 00
Press Enter to continue
Keyboard
The keyboard includes the following keys:
The arrow keys
are used to move between the rows of the controller screen.
The "Next" and "Prev" keys are used to move between elements in multi-element screens such
as: valves, sequences, water meters and paging the log book.
The "+" and "-" keys are used to change the numeric value in programming and the selection of
different options in the definition of the controller. Continual depression of these keys accelerates
the rate of change of the numbers.
Simultaneous depression of "Enter" and "+" or "-" changes the numbers by tens.
The "Enter" key is used to enter some of the data into the controller:
1. Confirm changes of programming parameters.
2. To confirm some system actions when the "Press Enter to Continue" message ppears.
3. To accelerate the number rate change.
4. When restoring factory defaults. See explanation in the "Controller Definition" chapter.
4. First Time Operation
Summary of Contents for Gal Pro 4
Page 1: ...GalPro AC DC Operating Manual...
Page 2: ......
