Galaxy GHDX2-2430S-16F4D Installation and Hardware Reference Manual
2-12
Rack/Cabinet Installation
Step 5.
Lock the flap into place
by turning the key-lock until the groove
on its face is pointing down (vertical orientation).
Figure 2-10: Drive Tray Key-lock Rotation
Step 6.
Once the drive tray is inserted, the RAID controller will
recognize the drive and scan it in automatically.
2.10. Rack/Cabinet Installation
The GHDX2-2430S-16F4D subsystem has been designed to fit into a
standard cabinet or rack. Two (2) slide rails are available for installing the
subsystem into a rack or cabinet. Please contact your system vendor for
further details. The subsystem should be installed in the rack or cabinet
before the hard drives and the drive trays are installed. If the drive trays with
the associated hard drives are installed, the subsystem will be too heavy to
mount into a rack or cabinet. When installing the subsystem into a rack or
cabinet it is advisable that three people assist in the mounting process.
To install the subsystem into a rack or cabinet please refer to the installation
instructions that came with the slide rails.
WARNING: DO NOT USE ONLY THE FRONT EAR HOLES TO MOUNT
THE GALAXY. DATA LOSS OR CORUPTION MAY OCCUR.
