Then press the Edit button of Output Channels 2 and 4, turning on their related “Blue” LED’s. Now
all parameters edited on Output Channel 1, will also be applied to channels 2 and 4.
If you want to remove one of the linked channels from the Link, press the related Edit button.
Exiting the editing of the Master channel during a Link session will automatically terminate that
session. The Link will also be automatically terminated if, during the editing of Output Channels
You jump across to begin editing an Input channel or vice versa.
● Factory Reset
In the event of the password being lost or any other reason the user may require the unit to be
reset to the original factory settings, a “Factory Reset” that will clear all settings of the DS-SP24
and return the device to the original factory setting, is available to the user.
Note:
Continuing with this process will mean the DS-SP24 will re-initialize to the original factory
settings and any previously stored information and changed parameters will be permanently lost.
– Use the following procedure to perform the factory reset:
1. While the DS-SP24 is switched OFF, simultaneously press the ENTER+ESC+UTILITY buttons
on the front panel.
2. Maintain pressure on all three buttons as you turn the power switch to On and the following LCD
screen appears on the DS-SP24:
3. Release the buttons and wait for the DS-SP24 to re-initialize.
Once completed, the DS-SP24 will resume regular operation as though it was a new unit from the
factory and no previously programmed parameters will be available for use.
Please Wait. . . . . .
Memory Reset
27
