Once a Password has been entered into the DS-SP24 through the steps described in the previous
paragraph, it is possible to “Enable” or “Disable” the password function and therefore lock the
DS-SP24 restricting access to all functions.
When a password has been entered you will be able to select the “Enable” option from the menu
and the unit will not be accessible for editing. In “
Locked by Password Status
”, all DS-SP24
functions are inhibited to the User, including the use of the Mute A/B and MUTE 1/2/3/4 buttons.
The only access available is to the parameters of the input/output channels (accessible by
pressing the edit button), ONLY to READ the values (no editing possible) if the “be shown” flag
in the “Show Parameter” Sub-Menu has been selected.
Once “Locked by Password” the “keylock” icon will appear on the default LCD screen and no menu
pages will be accessible, with the exception of the “User Password” option.
To regain access to the full operation of the DS-SP24, ENTER to the “User Password” screen and
press the UTILITY Button to access the following screen to enable the correct password to be
entered:
After the correct password has been entered, you will be able to access the full functionality of the
DS-SP24, the “lock Icon” will disappear from the “Default Screen” and automatically the “Enable
Password” page will be back to the “Disable” condition:
If no Password has been set within the DS-SP24, as described in the previous paragraphs, the
DS-SP24 will not allow you to enable any Password, and the choice in the “Enable Password” will
be limited to only the “Disable” option.
● Menu “Input A and B” Input Channels Editing [access by pushing the “A/B” buttons]
From the “Default Screen”, it is possible to access the “Input A and B” menu by pushing the “A” or
“B” button. Once the button is pressed the related blue “EDIT” LED will turn ON. The Sub-Menu
pages can now be scrolled through by rotating clockwise and counter-clockwise the “NAV/PM1”
encoder.
For parameter editing it is necessary to press ENTER and an arrow will appear on the left of the
screen “-> ”. Then use the “PM2” and “PM3” encoders for selecting and setting the parameter
values. On some parameters that have three independent values, you will also need to use the
“NAV/PM1” encoder, eg filter parameter settings.
Note:
All parameter editing can be done using the “NAV/PM1”, “PM2”, and “PM3” encoders and the
current shown value of the selected option is AUTOMATICALLY loaded during the encoders’ use
and stored as the current value once leaving the page.
User Password
[ ]
Enable Password
Password: Disable
*
15
