If presets have previously been stored by the user, anyone of them can be recalled:
By using the “PM2” or “PM3” encoder it is possible to scroll through the stored presets. Once the
desired preset appears on the screen select it by pressing the “ENTER” button and this will force
the DS-SP24 to begin to load this selected preset and the following transitory screen will appear:
Once loaded the DS-SP24 will exit to the “Recall a Program” screen automatically and the above
screen will disappear:
Note:
At any time it is possible to quit the recalling action by pressing the “ESC” button.
– Save a Program:
this page allows you to store a new preset in the DS-SP24’s memory:
By pressing the ENTER button and rotating the “PM2” or “PM3” encoder, it is possible to scroll
through the previously saved presets and the available empty locations (identified by “Empty
Memory”).
If no user presets are stored, the “Save a Program” screen will show empty memory locations
For all 1-24 presets as shown in the example below for location 10:
[ENTER] to Recall.
01: PRESET 1
Loading New Program . . . . .
01: PRESET 1
PROGRAM UTILITY
- Recall a Program -
PROGRAM UTILITY
- Save a Program -
Save a Program
10: Empty Memory
9
