Note:
At any time it is possible to quit the deleting action by pressing the “ESC” button.
Interface Utilities Sub-menu –
this sub-menu allows you to define the remote control interface
[USB or RS485] to be used for controlling the DS-SP24:
From “Interface Utilities”, press “ENTER” to access the Interface Setup.
– Interface Setup:
this screen allows you to choose the remote control protocol for the DS-SP24.
By pressing “ENTER” and then using the “PM2” or “PM3” encoders you can choose between the
two possible interfaces (USB or RS485) for the DS-SP24.
Pressing ENTER on a selected source will make an asterisk appear to the right of the description
on the LCD as in the following example which shows the selected interface as USB.
Security Sub-menu –
this sub-menu allows the User to set the parameters shown, lock the
DS-SP24 and set a Password therefore limiting the unit's functions and controls to those who have
only access to the appropriate Password.
Press ENTER and then use the “NAV/PM1” to scroll between options.
– Show Parameter:
Pressing ENTER from the above menu will access the “Show Parameter”
Sub Menu.
UTILITY MENU
- Interface Utilities -
INTERFACE UTILITY
- Interface Setup -
Interface Setup
Source: USB
*
SECURITY UTILITY
- Show Parameter -
UTILITY MENU
- Security Utilities -
12
