Using the “PM2” or “PM3” encoders to choose a character and the “NAV/PM1” encoder to move
between available locations you can enter a
6 Character Password Name
.
The current position of the cursor for the characters to be entered is shown by a “blinking
underscore”.
During this editing phase, the display is as follows if we were using “DSSP24” as the password:
The DS-SP24 will exit the “Unit Lock” sub-menu and jump to the “User Password” sub-menu page
screen:
If the password entered in the “Confirm Password” page matches the one entered in the “Enter
Password” page, the following screen will appear.
The Password is now configured and held in the device’s memory.
The user can now decide to “lock” the DS-SP24 by Password, inhibiting the access to ALL
processor functions depending on the setting of the parameter “Password Enable/Disable”,
explained in the following paragraph.
– Enable Password:
from the “Enable Password” sub-menu:
Press “ENTER” to gain access to the “
Enable Password
” screen:
User Password
[DSSP24]
SYSTEM UTILITY
- Insert Password -
Confirm Password
[DSSP24]
SYSTEM UTILITY
- User Password -
Enable Password
Password: Disable
*
14
