Press ENTER again and use the “PM2” or “PM3” encoders to scroll between the “be shown” and
“not be shown” options. An asterisk will highlight which option is selected.
Choosing the “be shown” option means that once the unit is locked, you cannot access parameter
editing features, but they will be displayed on the LCD screen.
Choosing the “not be shown” option means that once the unit is locked, the parameters will not be
shown at all. With this option, when trying to access a parameter, the following screen message
will appear:
– Lock Unit:
this sub-menu allows the user to lock the device so no parameters can be edited
or modified.
When the Unit is in an unlocked condition, all parameters will be available for editing. When
you select On, all parameters will be locked and are not available for editing.
When you select lock from the menu, the unit will be locked and the lock menu automatically
exited. The screen will revert to the “Default” showing the current X-Over configuration and
the preset selected and beside the preset’s name a “keylock” icon indicating that the
DS-SP24 is locked.
– User Password:
from the “User Password” sub-menu:
Press “ENTER” to access the “
User Password
” page:
Lock Unit
Lock : On
*
Parameter will
not be shown
*
SYSTEM UTILITY
- Lock Unit -
SECURITY UTILITY
- User Password -
User Password
[ ]
13
