31
• LED Meter Bars
The DS-CP25 has on its front panel, 10 LED meter bars, able to show constantly the overall status of the
processed signals.
Logically, the LED meter bars can be divided in 2 different blocks:
1. LED Meter Bars for the Clip/lnput level displaying
2. LED Meter Bars for the Limiter/Output level displaying
3. LED Meter Bars for the Compressors activity displaying
Referring to the following pictures:
LED Meter Bars for the Clip/Input
- these bars of LED meters indicates, when turned on, clipping of the
input signal, with the other LEDs showing the current input level BEFORE ANY PROCESS, ranging from
+20dBu (Clip) up to -20dBu.
LED Meter Bars for the Lim/Output
: these bars of LED meters indicates, when turned on, that the Peak
Limiter is active and limiting the output signal, clipping of the output signal, with the other LEDs is showing
the current output level AFTER ALL PROCESSES, ranging from +20dBu (Clip) up to -15dBu.
LED Meter Bars for the Compressors Activity
- these bars of LED meters shows from top to bottom, the
activity of the RMS Compressors.
When not active, the +20dBu LED will be turned on orange, when the activity is present, its amount is
shown from top to bottom by the LEDs, ranging from +20dBu up to -10dBu.
•GND LIFT switch
When the switch is positioned on Ground, the Main Power Supply Ground is connected to the Chassis.
L
IN
R
IN
L
OUT
R
OUT
Clip/Input LED Meter Bars
Limiter/Output LED Meter Bars
Cmp1 Cmp2 Cmp3 Cmp1 Cmp2 Cmp3
Lch
Rch
L
COMP
R
COMP
Left Channel Compressor
Activity LED Meter Bars
Right Channel Compressor
Activity LED Meter Bars
