Talano & Alera User Manual v1.4
3
User Instructions
The bath is simple to operate and use. Please spend a few minutes reading
these instructions to familiarise yourself with its operation.
• Fill the bath with water to the desired level and temperature using either the tap or optional autofill
if fitted (Figure 1.0)
.
Autofill instructions are provided on page 7 of this document.
The optimum bath fill is indicated by the middle level (150 litres). This ensures that water is not
wasted when the bather is lowered into the water.
• Check the temperature of the water prior to bathing. The temperature of the hot water is limited to
43
°C. The water temperature can be
reduced by adding cold water.
• We suggest that while the bath is filling, the seat is brought out of the bath and lowered ready for
the bather. Handset instructions are provided on page 4 of this document.
• Note that the seat arms lift to allow easier access. Ensure that the lap belt is fastened around the
bather and is secure. The lap strap should be worn at all times when using the bath (Figure 2.0).
• Before lifting the bather, ensure that the seat arms have been lowered into the down position and
the user is sat back in the seat.
• Do not leave the bather unattended.
• Make sure the area outside the bath is kept clear to allow the seat to traverse.
SWL Fixed Seat = 165kg.
SWL Transfer Seat = 140kg
.
Figure 1.0
Figure 2.0
