Gaggenau WT260110, User Manual, Page: 58 / 68

en
Troubleshooting
58
Fault Cause and troubleshooting
The drying time is too
long. Remote start is activated and the ambient temperature
is lower than 16 °C.
▶
Ensure that the ambient temperature is above 16
°C or start the next drying process within 2 hours.
→
" Technical data", Page 63
"Please clean lint fil-
ter" and the appli-
ance is not respond-
ing to operation. The ambient temperature is low and the base unit fil-
ter is damp.
1.
→ "Cleaning the filter system on the base unit",
Page 36 .
2.
Dry the filter thoroughly after cleaning.
3.
→ "Closing the base unit", Page 51 .
4.
→ "Switching off the appliance", Page 36 .
5.
→ "Switching on the appliance", Page 35 .
6.
→ "Starting the programme", Page 35 .
"Selfcleaning" Automatic self-cleaning function rinses the appliance's
heat exchanger.
1.
Not a fault.
2.
Do not pull out the condensation tank.
3.
Do not cancel the programme.
Water is leaking from
the appliance. Appliance is not correctly aligned.
▶
→ "Aligning the appliance", Page 16
The seal for the heat exchanger cover is dirty.
▶
Clean the seal for the heat exchanger cover.
→
"Cleaning the filter system on the base unit",
Page 36
Water drain hose is not connected correctly.
▶
Ensure that the water drain hose is connected cor-
rectly.
→
"Connecting the water drain hose", Page 14
The lever for the heat exchanger cover is not closed
correctly.
▶
Ensure that the lever for the heat exchanger cover
is closed correctly.
→
"Closing the base unit", Page 51
"Refresher-container
is empty, please re-
fill." The water tank for the crease-removal function is
empty.
▶
Fill water tank.
→
"Filling the water tank", Page 40 .