Gaggenau WT260110, User Manual, Page: 57 / 68

Troubleshooting
en
57
Fault Cause and troubleshooting
The drying time is too
long. The base unit's filter is soiled.
▶
→ "Cleaning the filter system on the base unit",
Page 36
The ambient temperature is greater than 30 °C.
▶
Ensure that the ambient temperature is below 30
°C.
The ambient temperature is lower than 15 °C.
▶
Ensure that the ambient temperature is above 15
°C.
Insufficient air circulation at the appliance's installation
location.
▶
Ventilate the appliance's installation location.
Insufficient condensation for the automatic self-clean-
ing when permanently drying small loads of laundry.
▶
Regularly dry a load weighing more than 3 kg of
damp laundry until the programme ends.
Insufficient condensation for the automatic self-clean-
ing when permanently using the crease-removal func-
tion.
▶
Regularly dry a load weighing more than 3 kg of
damp laundry until the programme ends.
The appliance's ventilation opening is blocked.
▶
Ensure that the ventilation opening of the appliance
is kept clear.
Heat exchanger is soiled.
▶
Running the basic appliance care programme on
the appliance.
→
"Appliance care", Page 47
The base unit filter is damp.
1.
→ "Cleaning the filter system on the base unit",
Page 36 .
2.
Dry the filter thoroughly after cleaning.
3.
→ "Closing the base unit", Page 51 .
4.
→ "Switching off the appliance", Page 36 .
5.
→ "Switching on the appliance", Page 35 .
6.
→ "Starting the programme", Page 35 .
"Ready in" time is activated and the ambient temperat-
ure is lower than 16 °C.
▶
Ensure that the ambient temperature is above 16
°C or start the next drying process within 2 hours.
→
" Technical data", Page 63