en
Crease-removal function
40
The average programme duration
of the crease-removal function is
approx. 45 minutes and may be
longer or shorter depending on the
ambient temperature.
a
After the programme has ended,
the display shows: "Finished, re-
move washing" .
3.
Remove the laundry.
→
The results of the crease-removal
function may vary depending on
the type of fabric, the amount of
laundry and the selected pro-
gramme.
Remove the laundry immediately
after the programme has ended to
prevent creasing.
4.
Hang up the items of laundry and
pull them into shape.
14.2 Filling the water tank
Your appliance removes the creases
from rarely worn clothing using cold
drinking water. If the display shows a
notification while the appliance is in
operation, fill the water tank.
ATTENTION!
Operating the appliance with water
that is dirty or too hot may result in
damage to the appliance.
▶
Only fill the water tank with cold
drinking water.
▶
Never use condensed water, dis-
tilled water, additives or descaler
for the crease-removal function.
Requirements
¡
You have started a programme
with the crease-removal function.
→
"Starting a programme with the
crease-removal function", Page 39
¡
The display shows: "Refresher-
container is empty, please re-fill." .
¡
appliance.
1.
Add approx. 180 ml cold drinking
water through the front opening,
using the water jug provided.
Check the water tank filter regu-
larly and clean the filter if it is dirty.
→
"Cleaning the water tank filter",
If "Refresher-container is empty,
please re-fill." does not go out on
the display, add cold drinking wa-
ter through the front opening and
align the appliance correctly.
→
a
"Refresher-container is empty,
please re-fill." goes out on the dis-
play.
2.
Insert the condensation container.
→
"Inserting the condensation con-
3.
Start the programme.
→
Summary of Contents for WT260110
Page 1: ...User manual and installation instructions WT260110 Tumble dryer Gaggenau ...
Page 65: ......
Page 66: ......
Page 67: ......
