Gaggenau WT260110, User Manual

Page: 45 / 68

Home Connect
en
45
¡
The washing machine and dryer
must be connected to your home
network and registered in your
Home Connect app.
Using the intelligent programme
recommendation
1.
Set the
SMART DRY
programme.
a
The appliance detects a suitable
programme. To cancel or change
the programme recommendation,
set a different programme or
switch the appliance off.
a
If the appliance finds a suitable
programme, the display for the
programme lights up.
a
If the appliance does not find a
suitable programme, a signal
sounds and the display shows
"There is no particular drying pro-
gramme recommended for the last
wash programme." .
2.
If the appliance displays additional
information, confirm these notifica-
tions in the display.
a
The display shows the programme
information.
3.
Press .
Note
Why is my dryer unable to
recommend a programme?
¡
No suitable drying programmes for
the selected washing programme
on the dryer.
¡
No data is available for the last
washing programme used. The
data is stored for 24 hours and
then deleted.
¡
The washing programme has been
cancelled. The washing pro-
gramme must run through to the
end for analysis to be possible.
16.8 Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip:
For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com.
16.9 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡
Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡
Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡
The current software and hardware
version of your appliance.
¡
Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note:
Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.