23
F
i
tt
i
ng s
i
de wa
ll
s to bu
il
t
i
n app
li
ances
If there are no kitchen units adjacent to the appliance,
the side walls can be fitted directly to the appliance
itself.
Appliances that cannot be secured to adjacent units
must be secured to the wall. For wall fixing, use the
following modification kit:
Accessories no. Wb 010090.
1.
Position the angle brackets over the existing tapped
holes on top of the appliance at the side.
2.
Bring the side walls into the correct position against
the appliance.
3.
Mark the position of the angle brackets on the side
walls.
4.
Remove the side walls.
5.
Position the angle brackets over the marked
positions and mark the drilling points.
Note!
Only drill and screw into the designated points,
otherwise there is a risk of damaging the appliance.
6.
Drill pilot holes (drill diameter 2 mm).
Do not drill too deep.
7.
Secure the angle brackets to the side walls.
8.
Position the side walls against the appliance.
9.
Secure the angle brackets to the appliance.
10.
Drill pilot holes (drill diameter 2 mm) in the side walls
for the side brackets and hinges.
Do not drill too deep.
11.
Screw the side brackets onto the side walls.
12.
Screw all hinges onto the side walls.
Summary of Contents for RX496
Page 1: ...Gaggenau en Installation instructions RX 496...
Page 2: ......
