18
6.
A
li
gn
i
ng the app
li
ance
For alignment, the appliance must be standing on a flat
surface.
1.
Position the appliance in the intended installation
area.
2.
Loosen the lock nut on the four adjustment spindles
of the appliance feet.
!
Wa
r
n
i
ng!
The appliance could tip over if any one of the
appliance feet is turned in or out too far. Screw the
appliance feet in or out little by little one after the
other.
3.
To adjust the height of the appliance: Turn the
hexagon on the adjustment spindles until the desired
height is reached. Always readjust the antitip
stabiliser at the same time.
4.
Using a spirit level, align the appliance vertically and
horizontally.
All castors must be standing firmly on the floor. The
castor of the antitip stabiliser must also be firmly on the
floor. The appliance must not wobble.
5.
Tighten the lock nuts.
Summary of Contents for RX496
Page 1: ...Gaggenau en Installation instructions RX 496...
Page 2: ......
